Equipment Inventory

Inventory Updated : August 2021

FEATURED EQUIPMENT

48” x 16’ 400 PSI 3 Phase, loaded with accessories above ground piping

  • 8 in stock
  • New

60” x 20’ 400 PSI 3 Phase Separator Refurbished with warranty

  • 2 in stock
  • New

2.5MMBTU Regan Skid

  • 1 in stock
  • New/Used

DEHYDRATORS

DEHYDRATORS -TOWERS AND REGEN SKIDS

TEG Units Reboilers from 80,000 to 2,500,000 BTU/HR (Call for details)

TOWERS:

  • 2 ea      8” x 14’ 1440 PSI Packed (Unused)
  • 1 ea      10” x 17’ 1440 Packed (Unused)
  • 3 ea      12” x 17’ 1440 Packed (Unused)
  • 2 ea     12” 4 tray, with 125,000 BTU Regen
  • 12 ea   12” Packed 1000 and 720 PSI Contact Towers
  •   3 ea    16” 1440 PSI Towers
  •   1 ea    16”1440 PSI with 165MBTU Regen
  •   1 ea    18” with Precontactor 1000 PSI
  •   2 ea   24”  24’ 8 Tray 1440 PSI w/Scrubber (Unused)
  •   1 ea    24” 8 Tray 1440 PSI (Good used-just field run)
  •   1 ea   24” 6 tray 1440 PSI Contact Tower
  •   1 ea  2,500,000 BTU Reboiler skid, (4) 450 pumps – new/unused
  •   1 ea  500,000 BTU Reboiler
  •   1 ea  450,000 BTU Reboiler skid-older but sound
  •   2 ea  200,000 BTU Regen skids with two pumps (2 new-unused). YOM 2012
  •   4 ea  250,000 BTU Regen skids to match with several tower sizes, refurbished.
  •   3 ea  30” 1440 PSI Contact Towers
  •   1 ea  36” 960 PSI, 450,000 BTU Regen
  •   1 ea  36” 6 tray with scrubber

Several Used Rebuildable dehy reboilers from 125M to 200MBTU

SEPARATORS/PRODUCTION UNITS

(aka: GPU or T Pack) 3 Phase, In-Direct Fired Enclosed.

  •     3 ea  500,000 BTU, 16” 1000 PSI, 2” 3000 PSI Coils
  •     4 ea 500,000 BTU, 16” 1440 PSI, 2” 6500 PSI Coils
  •     2 ea  500,000 BTU, 20” 1440 PSI, 2” 3000 PSI Coils
  •    4 ea 750,000 BTU, 20” 1422 PSI, 2” 6500 PSI Coils
  •     1 ea 1,000,000 BTU, 24” 1440 PSI, 2 1/2” 15,000 PSI Coils
  •     1 ea 1,500,000 BTU, 36” 1440 PSI, 2 ½” 10,000 PSI Coils

SEPARATORS/HLP

PRODUCTION FLANGED HEADS -Direct Fired

  •      2 ea   60” x 20’ 3 Ph, Horizontal 400 PSI Flanged heads Late Model
  •      5 ea   48” x 20’ 3 Ph Vertical 125 PSI Direct fired
  •      3 ea    48” x 16’ 3 Ph Horizontal 400 PSI Flanged heads-DJ Basin OEM: Leed
  •      8 ea    48” x 16’ 3 Ph Horizontal 400 PSI Flanged heads-DJ Basin OEM:  PESCO(Above ground piping)
  •      3 ea   48” x 16’  HLP 24” 500 PSI HP, Flanged heads New Units
  •      6 ea  36” x 12’ 3 Ph, Horizontal 400 PSI (4) Flanged heads
  •      6 ea  30” x 10’ 3 Ph, Horizontal 400 PSI Flanged heads (Super nice, unused – High Tech!)
  •      2 ea  30” x 10’ 3 Ph, Horizontal 400 PSI Flanged heads – (Above ground piping)
  •      6 ea 30” x 10’ 3 Phase Horizontal, 300 PSI, 2” 3000 PSI Coils Flanged heads both ends
  •      4 ea 30” x 10’ 3 Phase Horizontal, 250 PSI, 2” 3000 PSI Coils
  •      4 ea  36” x 12’ 3 Phase Horizontal, 270 PSI, 2” 3000 PSI Coils
  •      1 ea  36” x 12’ Dual Unit 500 PSI
  •      3 ea 12 or 16” over 30” HLP Units, 2” 3000 PSI Coils (One ready to ship)

SEPARATORS/SCRUBBERS, FILTER SEPS & VESSELS

  •     1 ea  72’ x 20’  Horizontal 125 PSI Surge Tank heated
  •     1 ea  72” x 12’ Horizontal Slug Catcher 1040 PSI, 12” I/O
  •     1 ea  72” x 20’ 50 PSI 2 Ph Knockout Drum
  •     4 ea  72” x 15’ 50 PSI FWKO (Free Water Knock Out-non code but solid)
  •     4 ea  48” x 18’ Vertical 125 PSI, 3 Phase Heated
  •     2 ea  48” x 25’ 50 PSI VRT Vertical
  •     1 ea  48” x 10’ 3ph Horizontal, 1440 PSI
  •     1 ea  36” x 40’ 2 Ph, Horizontal 250 PSI Slug Catcher w/6” ANSI 300 I/O No Tag
  •     1 ea  36” x 10’ 300 PSI Horizontal Refrig Accumulator
  •     1 ea  36” x 10’ 250 3 Ph 250 PSI Horizontal
  •     1 ea  36” x 10’ 200 PSI, 3 Ph, Flash Separator
  •     1 ea  30” x 15’ Horizontal 1000 PSI Separator 6” I/O MFG: NATCO
  •     1 ea  30” x 10’ 2 Ph, 450 PSI Vertical: OEM: BS&B
  •     1 ea 30” x 10’ 2 Ph, 1440 PSI. 3 Ph, Horizontal, 4” I/O
  •     4 ea  30” x 6’ 3 Ph Vertical, 250 PSI
  •     1 ea 30” x 10’ 3 Ph, 250 PSI Horizontal
  •     1 ea 30” x 10’ 2 Ph, 500 PSI Horizontal
  •     2 ea 30” x 10’ 2 Ph, 500 PSI Horizontal, skidded
  •     1 ea  30” x 10’ 2 Ph, 125 PSI Vertical
  •     1 ea  28” x 12’ 275 PSI, Vertical, MFG: King Tool
  •     1 ea  24” x 10’ 3 Ph Vertical, 1440 PSI
  •     1 ea  24” x  10’ 2 Ph 1200 PSI 2 Horizontal  4” I/O MFG:  NATCO
  •     4 ea  24” x 7’6” 3 ph 1000 PSI Hor
  •     1 ea  24” x 8’ 3 Ph 500 PSI Hor, w/high level shutdown.
  •     1 ea  24” x 4.5’ 2 Ph, 1480 PSI  Scrubber with Stainless Vanes, 10” ANSI 600 RTJ  I/O  MFG: Peerless
  •     1 ea  24” x 6’ 2 Ph, 1440 PSI  Vertical Scrubber, 4” ANSI 600 RTJ I/O MFG: Boyce
  •     1 ea  24” x 7’6” 3 Ph, 720 PSI Horizontal, 4” ANSI 300 I/O
  •     1 ea  24” x 8’ 2 Ph 525 PSI Vertical
  •     1 ea  24” x 8’ 1440 PSI Vertical Scrubber
  •     1 ea  24” x 10’ 600 PSI Horizontal Cold Separator w/1” coils
  •     2 ea  24” x 10’ 1440 PSI Vertical 3 Ph (Unused)
  •     1 ea  20” x 10’ 1440 PSI 2 Ph Horizontal.
  •     3 ea  20” x 10’ 1000 PSI 3 Ph Horizontal
  •     1 ea  20” x 6’ 325 PSI 3 PH, Vertical
  •     3 ea  20” x 7’6” 1440 PSI 3 Ph Vertical
  •     1 ea  20” x 7’6” 3 Ph 1440 PSI Horizontal 6” I/O
  •     1 ea  20” x 7’6” 2 Ph, 125 PSI Vertical, MFG:  Olman Heath
  •     1 ea  18” x 5.5’ 2 Ph 1440 PSI Vertical, 8” ANSI600
  •     3 ea  16” x 10’ 3 Ph 1440 PSI Horizontal
  •     1 ea  16” x 7’6” 2 Ph 500 PSI Vertical, (unused)  Housed.
  •     1 ea  16” x 7’ 2 Ph 500 PSI Vertical
  •     1 ea  16” x 13’6” 250 PSI& 600 PSI Tubes gas chiller
  •     1 ea  16” x 5’ 2 Ph, 500 PSI Vertical
  •     1 ea  14” x 10’ 300 PSI Propane Compressor discharge scrubber
  •      2 ea  12” x 4’ 3 Ph, 125 PSI
  •   18 ea  12” x 30” 500 PSI 3 Phase Horizontal

HEATER-TREATERS

  •   3 ea  6’ x 20’ Vertical 75 PSI
FLARES

LINE HEATERS & GLYCOL HEATERS

  • Glycol heaters built new custom – 250M to 4MMBTU/hr

FLARES

  •  6 ea     3” x 21’ 84MCF to 550MCF @ Atmospheric, hand lowering winch, with 6’ x 6’ Base.

ECD-ENCLOSED FLARES (QUAD O) (Combusters)

  •   6 ea    24” Cimarron Standard ECD 9.2 MCFD
  •   2 ea    18” Stainless Steel ECD 2.29MMBTU/Hr Abutec
  •   1 ea   30” Stainless Steel ECD Part # SCUF9.1MMBTU/Hr Abutec
  •   1 ea    24” Leed High Capacity ECD 40 MCFD
  •   3 ea    30” Cimarron Standard ECD
  •   3 ea    36” Leed High Capacity ECD 100 MCFD
  • 20 ea    48” Cimarron Standard ECD
  • 15 ea    48” Tornado Model: TEC-4 ECD 100 MCFD
  • 10 ea    48” Leed High Capacity 100 MCFD
  • 28 ea    48” Curtis Wright/Cimarron HOV 100 MCFD some dual burners.
  •  6 ea     60” Cimarron style Standard ECD 67MCFD

METER RUNS & METER RUN BUILDINGS

  •     20 ea   2” Simplex Style ANSI 600-Older AGA custody transfer specs.  Only for prover MR applications.
  •     19 ea   3”     ANSI 600 Orifice fitting X ANSI 600 Flanges X 109” AGA New
  •     14 ea   3”     ANSI 600 Orifice fitting X ANSI 300 Flanges X 90”  AGA New
  •    15 ea   4”      ANSI 600 Orifice fitting X ANSI 300 Flanges X 105” AGA New
  •      8 ea   3” Simplex Style ANSI 600 W/CPA 50 E Flow Conditioner-Current AGA Housed, Inspected with certification.
  •     3 ea  3” Simplex Style ANSI 300 -Current AGA Housed, Inspected with certification.
  •     2 ea  4 “ Simplex ANSI 600 (Unused)
  •     1 ea  8” Simplex ANSI 600
  •    12 ea       Meter run buildings, skidded.

SPECIALTY UNITS

  •   VRU Compressor-Vapor Recovery, Blackmer Model: NG942 (New), Kubota driver.
  •   BTEX Busters several to chose from.   
  •   VRU, 60,000 Cubic Feet Per Day
  •   STABILIZER UNIT, 18”
  •  COMBINATION UNITS – Production Unit & Dehy Unit
  •   FLASH GAS COOLER, 48” Fan, Stainless Tubes, 2.2MMCFD Capacity, 245 PSI.
  •   6 ea  FLAME ARRESTORS, Protectoseal Model #C2500 and ENARDO units in stock.

TANKS & GUNBARREL Steel

  •     6 ea 500 Barrel (12’ x 25’Tall)
  •    2  ea  400 Barrel Gunbarrel
  •   25 ea  400 Barrel (12’ x 20’ Tall)
  •   12 ea 300 Barrel (Standard uprights and low pro)

TANK HEATERS & STAIRWAYS

  • 250,000 and 500,000 BTU with stack and burner.
  • Heat trace coil bundles in stock. Various configurations.
  • We inventory new and used stairways and walkways of various configurations.

Field of tanks

TANKS – FIBERGLASS

  •   4 ea  500 Barrel (12’ x 25’ Tall)
  •   1 ea  500 Barrel LP (15’5” X 16’ Tall)

VESSELS

  • We build new ASME vessels any size – Inquire

CORIOLIS

  •    1 ea   2” Emerson Micro Motion R series
  •    1 ea  2” Emerson Micro Motion F series
  •    3 ea  2’ ABB Coriolis
  •    3 ea  1” ABB Coriolis

LARGER BALL VALVES IN STOCK

  •    1 ea   8” ANSI 600 Trunion Balon-New in crate.
  •     3 ea  10”  Trunion FP 740 PSI 10F-T33-RF Unused-Surplus MFG:  Balon

ON SITE SUPPLY STORE STOCKING THIS RANGE OF PARTS:

  • Pipe nipples: ¼” thru 3”, close thru 20” Seamless.
  • Weld fittings:  ½” thru 3” assorted.
  • Bull plugs various thickness.
  • Hammer unions.
  • Bushings.
  • Fasteners.
  • Gauges: Dry and liquid filled.
  • Valves:  Needle valves, Balon ball valves ¼” thru 4” in stock.
  • Kimray kits
  • T12 Thermometer and thermowells.
  • Regulators:  64 thru Big Joe, Fisher 4660
  • Relief valves. Taylor and Mercer.
  • Sight Glass: Low and high pressure, gauge valves.
  • Liquid level controls with floats and parts. LS200 in stock.
  • Superlok stainless tubing connectors.
  • Automation parts.
  • Electrical Parts.
  • 2” Coriolis R & F Micro Motion series with transmitters.
  • 2” and 1” ABB Coriolis in stock (3 each)
  • Profire 2100 BMS
  • Enardo 660 Thief hatches.
  • Flame arrestors-Wenco, Protectoseal and Enardo
  • Pall rings.
  • Tank door gasket material.
  • Gaskets.
  • Anodes.
  • Burner assemblies.
  • Catalytic heaters.

All the above items are in stock at our yard in Hudson, CO.

Supply Store

Did you know we sell equipment supplies at our yard in Hudson, CO? We have hundreds of items ready to go, so check out the kind of items we stock, and then give us a call or come out and see the items first hand!

VIEW OUR PARTS & SUPPLIES

ALL EQUIPMENT AND PARTS ARE IN STOCK AT OUR HUDSON, COLORADO FACILITY

We Ship Worldwide

High Country Sales & Trading Serves Our Customers Wherever They Are.

Get Started

Didn’t see what you were looking for?

Contact us if you have any questions or if you need something not in our list. Even if we don’t have it, we might be able to source the equipment you are looking for.

CONTACT US